Water Damage Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the property could be because of an overflow, flood or any other water damage and mold event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) as well as the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide is the benchmark tool that is utilized by companies focusing on restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the first and the most important part of water damage and mold restoration. The assessment needs to be correct so that an appropriate response can be utilized. In restorating the damage due to water, technicians as well as the insurance firms must work together and understand what is damaged and how to go about restoring the injury. Identifying the origin from the damage, documentation of damage, and accurate estimates are mandatory for any proper water damage restoration. Categorization relies on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This can be water that has some contaminants like water from the dishwasher, washing machine or toilet with urine.
Category 3 – This can be water that is highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a few examples.
Decontamination and Drying – After the evaluation is complete, the process of drying and decontaminating begins on the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and much less water continues to be absorbed by materials. This brings about slow evaporation rate. Class 2 Damage – If the damage is to the complete room and carpet area. Class 3 Damage – If the entire area is saturated with water and sophistication 4 Damage – when there are many deep saturation pockets. Decontamination and drying is really a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments need to be used. Decontamination has to be done if contamination has become detected in the community. Decontamination may be completed for the complete area or in specific pockets where contamination has been detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused due to damage is crucial to obtain the desired results. One must be proactive throughout the monitoring process. Checking if the drying tools are setup properly, assessing when the personnel involved are qualified for the task and checking if the equipments will be in working order inwtsy all part of the monitoring process. Necessary steps have to be taken if anything wrong is spotted during the monitoring process. The entire process of water damage restoration could be classified as complete just once the humidity, temperature and also the moisture content is just as per industry standards. Upon completion of this type of water damage restoration process, the drying equipment can be removed.