Fiber proof testers are designed to use a set up weight to some combination-spliced optical fiber so that you can test the potency of the spliced fiber. Our fiber proof testers are available in each linear and rotary designs, both for proof and stress screening. Fiber proof testers are accessible for solitary mode, multimode, and polarization-sustaining materials. Pick from dedicated, stand alone systems or multi-purpose designs which can be also capable of stripping, cleansing, cleaving, splicing, and recoating.

Fiber Recoaters with proof Testers provide simple, incorporated answers to recoat and test fusion-spliced fibers. The fiber recoating process restores the barrier covering to some stripped fiber, offering more flexibility compared to a warmth-reduce protection sleeve, allowing that it is dealt with and coiled without damaging the fusion-spliced section. The integrated linear or rotary proof tester enables customers to right away test a recoated fiber using a pre-determined weight and figure out the long term reliability of the Sheathing Line. Due to their capability to restore a combination-spliced fiber to close to initial problem, these techniques are perfect for programs including undersea optical fiber cables, submarine interaction cabling, fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

The process starts with the fusion-spliced portion of fiber being placed in the middle of the mildew set up (see image off to the right). As soon as set in position, inserts within the fiber blocks secure the spliced fiber in place. Recoat materials is motivated to the cavity then Ultra violet-treated. The recoated fiber can then be analyzed by pulling onto it up to a pre-decided weight.

Recoater and Mold Set up Options – Recoaters are available with possibly a computerized or handbook mildew set up. The automatic mold assembly features pneumatic control over the mildew dishes and is enhanced for top-quantity production programs. Handbook mildew assemblies, on the other hand, use hinged mold dishes which provide much more flexibility and are perfect for reduced-quantity production or RAndD applications. An automatic or handbook volumetric dispensing pump and shot system can be used to inject the recoat material to the mold cavity.

The PTR208 automated recoater arrives standard using a mildew assembly for Secondary Coating Line; For your manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mildew assembly comes individually in order that customers can choose the best mold covering diameter for application. Custom mold covering dimensions can be found up to Ø900 µm. Pre-installing of the mildew set up at the manufacturer can also be available. Contact Technology Support for additional info on customized molds or factory assembly.

We offer each higher-directory (Item # AB950200) and low-index (Item # PC373) recoat materials to use in these recoaters. Recoaters with handbook shot pumping systems (Item #s PTR206B and PTR307B) are suitable for each types of recoat material; other recoaters are compatible with the high-index materials only. Our handbook recoaters with an automated injection system (Product #s PTR206 and PTR307) may be personalized to do business with both low- and-directory recoat materials; please contact Tech Assistance for additional information.

proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters have an integrated linear proof tester, that can take the fiber up to a predetermined load (20 N) and then releases it. The linear proof tester uses exactly the same fiber holding blocks because the recoater and therefore the fiber does not need to be relocated just before screening. The PTR307 and PTR307B Fiber Recoaters come with an incorporated rotary proof tester, which can carry out both proof and stress tests (?89 N). One set of proof test grips is included; substitute proof test grips can be found below in packs of 10. Each screening procedure is fully automated via the provided handset or tablet pc controller, allowing ikrsve user to choose parameters including the load, the rate in which the stress is applied, and also the hold time.

Inserts for Fiber Holding Blocks – In addition to the previously mentioned, we provide many different inserts to use inside the SZ Stranding Line keeping blocks of the recoaters to be able to assistance an array of fiber coating diameters. For recoaters using a rotary proof tester, the inserts are compatible with fiber coating diameters in a vary from 125 µm to 900 µm. For recoaters having a linear proof tester, the inserts include a array for fiber coatings from Ø250 µm to Ø900 µm.

Optical Fiber Coloring Machine – Look At This Write-Up..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.