Fiber proof testers are created to use a set load to a fusion-spliced optical Fiber in order to evaluate the strength of the spliced Fiber. Our Fiber proof testers can be purchased in both linear and rotary styles, for both proof and stress screening. Fiber evidence testers are available for solitary mode, multimode, and polarization-maintaining fibers. Pick from dedicated, standalone techniques or Secondary Coating Line which can be also capable of stripping, cleaning, cleaving, splicing, and/or recoating.

Fiber Recoaters with Evidence Testers offer simple, integrated solutions to recoat and test combination-spliced fibers. The Fiber recoating process restores the barrier covering to some stripped Fiber, providing much more versatility when compared to a heat-shrink protection sleeve, allowing that it is handled and coiled without damaging the fusion-spliced section. The integrated linear or rotary evidence tester enables users to instantly test a recoated Fiber having a pre-determined weight and figure out the long-phrase reliability of the Fiber. Because of the capacity to restore a combination-spliced Fiber to near initial condition, these systems are perfect for programs including undersea visual Fiber cables, submarine communication cabling, Fiber lasers, or Distributed Bragg Reflector (DBR) lasers.

This process starts with the fusion-spliced part of Fiber being positioned in the middle of the mold set up (see image towards the right). Once set constantly in place, inserts inside the Fiber blocks secure the spliced Fiber set up. Recoat material is pumped into the cavity and after that Ultra violet-treated. The recoated Fiber can then be analyzed by pulling into it as much as a pre-decided weight.

Recoater and Mold Set up Options – Recoaters can be purchased with either an automated or handbook mold assembly. The automatic mold set up features pneumatic control of the mold dishes and is also enhanced for top-volume SZ Stranding Line. Manual mold assemblies, around the other hand, use easy-to-open mold dishes that offer much more versatility and are perfect for low-volume manufacturing or R&D applications. An automated or manual volumetric dispensing water pump and injection product is utilized to inject the recoat materials to the mold cavity.

The PTR208 automatic recoater comes standard having a mold set up for Ø430 µm covered materials; For the manual recoaters (Item #s PTR206, PTR206B, PTR307, and PTR307B), the mold assembly comes individually so that customers can choose the right mold coating size for program. Custom mold coating sizes can be purchased approximately Ø900 µm. Pre-installing of the mold set up in the manufacturer can also be available. Contact Technology Support to learn more about custom molds or manufacturer assembly.

We offer each high-index (Product # AB950200) and reduced-index (Product # PC373) recoat components for use in these recoaters. Recoaters with manual injection pumps (Product #s PTR206B and PTR307B) are compatible with each varieties of recoat material; all the other recoaters are suitable for our prime-directory materials only. Our handbook recoaters having an automatic injection system (Item #s PTR206 and PTR307) can be customized to work with both the reduced- and-directory recoat materials; please get in touch with Technology Support for additional information.

Proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters have a built-in linear proof tester, which takes the Fiber up to a predetermined weight (20 N) and after that releases it. The linear proof tester uses exactly the same Fiber keeping obstructs since the recoater and thus the Fiber does not must be relocated prior to testing. The PTR307 and PTR307B Fiber Recoaters include an incorporated rotary evidence tester, which can perform both evidence and tension assessments (?89 N). One set of proof check grips is included; substitute proof check grips can be found listed below in packs of 10. Each testing process is completely automated via the included handset or tablet controller, allowing the consumer to choose parameters such fdrofe the burden, the speed where the stress is applied, as well as the hold time.

Inserts for Fiber Holding Blocks – Along with the above, we provide you with a variety of Tape Former for use within the Fiber keeping blocks from the recoaters in order to support a wide range of Fiber covering diameters. For recoaters having a rotary proof tester, the inserts are appropriate for Fiber covering diameters inside a range from 125 µm to 900 µm. For recoaters using a linear proof tester, the inserts cover a range for Fiber coatings from Ø250 µm to Ø900 µm.

Cable Air Wiper..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.